A high flow / high pressure (up to 20 BAR) normally closed (power to open) piston type valve with brass forged body and Teflon seats. Mainly used as a steam valve as it will do up to 180 degrees Celsius (steam at 10 BAR) with either a flying lead or DIN plug coil. Will handle fluids up to 50 centistoke viscosity. Typical applications include high pressure irrigation, laundry equipment, hospitals, steam curing beds, boilers & general industry. Please note this is a hard PTFE seat so at low pressures/temperatures it may not give a bubble tight seal. Threads conform to ISO 7.1 Sealing Threads.

Model Port Size (BSP) Orifice ømm CV Pressure (BAR) Media Temperature Repair Kit Coil Specifications
B75-3-15-*T 3/8 15 4.5 0.5 to 20 -10°C to 180°C RK-B75-4-T SC-N16
DIN Plug
28 Watts
24 Volt Amps
100% ED
Class H Insulation
IP65
B75-4-15-*T 1/2 15 4.5 0.5 to 20 -10°C to 180°C RK-B75-4-T
B75-5-20-*T 3/4 20 9.3 0.5 to 20 -10°C to 180°C RK-B75-5-T
B75-6-25-*T 1 25 13.2 0.5 to 20 -10°C to 180°C RK-B75-6-T
B75-7-35-*T 1 ¼ 35 26 0.5 to 20 -10°C to 180°C RK-B75-8-T
B75-8-35-*T 1 ½ 35 26 0.5 to 20 -10°C to 180°C RK-B75-8-T
B75-3-15-*TF 3/8 15 4.5 0.5 to 20 -10°C to 180°C RK-B75-4-T SC-H2
Flying Leads
25 watts
33 Volt Amps
100% ED
Class H Insulation
IP54
B75-4-15-*TF 1/2 15 4.5 0.5 to 20 -10°C to 180°C RK-B75-4-T
B75-5-20-*TF 3/4 20 9.3 0.5 to 20 -10°C to 180°C RK-B75-5-T
B75-6-25-*TF 1 25 13.2 0.5 to 20 -10°C to 180°C RK-B75-6-T
B75-7-35-*TF 1 ¼ 35 26 0.5 to 20 -10°C to 180°C RK-B75-8-T
B75-8-35-*TF 1 ½ 35 26 0.5 to 20 -10°C to 180°C RK-B75-8-T


*Voltages available; 12vDC, 24vDC, 24vAC, 110vAC, 240vAC, 415vAC

Please note that this valve will only do steam to 10 BAR.

For Installation and Maintenance instructions please click here or find in our References section under Valve Installation and Maintenance for Solenoid Valves.

Brass Steam/High Temperature Solenoid Valve Dimensions

Model A B C D E F G (BSP) H Weight Kg
B75-3-15-*T 75 52 129 52 45 41 3/8 14.5 1.65
B75-4-15-*T 75 52 129 52 45 41 1/2 14.5 1.65
B75-5-20-*T 85 60 141 52 45 41 3/4 18 2.13
B75-6-25-*T 100 70 148 52 45 41 1 23 2.35
B75-7-35-*T 120 90 168 52 45 41 1 1/4 33 3.85
B75-8-35-*T 120 90 168 52 45 41 1 1/2 33 3.30
B75-9-50-*T 150 122 203 52 45 41 2 40.5 7.35

All dimensions in mm unless otherwise shown.

 

Brass High Temperature Solenoid Valve Construction

Item Article Material
1 Armature Stainless Steel 304
2 Plunger Stainless Steel 304
3 Coil Brass Wire
4 Plunger Seat Teflon
5 Spring Stainless Steel 304
6 Valve Body Brass Forged
7 Piston Brass
8 Leak proof & Piston Ring Teflon

 

Size 3/8" to 2" BSP
Function Normally Closed (power to open)
Valve Operation Servo Assisted
Body Brass
Seat PTFE
Pressure Range 0.5 to 20 BAR (10 BAR Steam)
Media Steam & High Pressure Air / Oil Media

Product History