A high flow / high pressure (up to 20 BAR) normally closed (power to open) piston type valve with a 304 Stainless Steel body and Teflon seats. Mainly used as a steam valve as it will do up to 180 degrees Celsius (steam at 10 BAR) with either a flying lead or DIN plug coil. Will handle fluids up to 50 centistoke viscosity. Typical Applications include high pressure irrigation, laundry equipment, hospitals, steam curing beds, boilers & general industry. Please note this is a hard PTFE seat so at low pressures/temperatures it may not give a bubble tight seal. Threads conform to ISO 7.1 Sealing Threads.

Model	Port Size (BSP)	Orifice ømm	CV	Pressure (BAR)	Media Temperature	Repair Kit	Coil Specifications
S75-4-15-*T	1/2	15	4.5	0.5 to 20	-10°C to 180°C	RK-S75-4-T	SC-N16-* DIN Plug 24 Watts 24 Volt Amps 100% ED Class H Insulation IP65
S75-5-20-*T	3/4	20	9.3	0.5 to 20	-10°C to 180°C	RK-S75-5-T
S75-6-25-*T	1	25	13.2	0.5 to 20	-10°C to 180°C	RK-S75-6-T
S75-7-35-*T	1 ¼	35	26	0.5 to 20	-10°C to 180°C	RK-S75-8-T
S75-8-35-*T	1 ½	35	26	0.5 to 20	-10°C to 180°C	RK-S75-8-T
S75-9-50-*T	2	50	48	0.5 to 20	-10°C to 180°C	RK-S75-9-T
S75-4-15-*TF	1/2	15	4.5	0.5 to 20	-10°C to 180°C	RK-S75-4-T	SC-H2 Flying Leads 25 watts 33 Volt Amps 100% ED Class H Insulation IP54
S75-5-20-*TF	3/4	20	9.3	0.5 to 20	-10°C to 180°C	RK-S75-5-T
S75-6-25-*TF	1	25	13.2	0.5 to 20	-10°C to 180°C	RK-S75-6-T
S75-7-35-*TF	1 ¼	35	26	0.5 to 20	-10°C to 180°C	RK-S75-8-T
S75-8-35-*TF	1 ½	35	26	0.5 to 20	-10°C to 180°C	RK-S75-8-T
S75-9-50-*TF	2	50	48	0.5 to 20	-10°C to 180°C	RK-S75-9-T

Please note this valve will only handle steam to 10 BAR.

*Voltages available; 12vDC, 24vDC, 24vAC, 110vAC, 240vAC, 415vAC

For Installation and Maintenance instructions please click here or find in our References section under Valve Installation and Maintenance for Solenoid Valves.

Model	A	B	C	D	E	F	G (BSP)	H	Weight Kg
S75-3-15-*T	75	52	129	52	45	41	3/8	14.5	1.65
S75-4-15-*T	75	52	129	52	45	41	1/2	14.5	1.65
S75-5-20-*T	85	60	141	52	45	41	3/4	18	2.13
S75-6-25-*T	100	70	148	52	45	41	1	23	2.35
S75-7-35-*T	120	90	168	52	45	41	1 1/4	33	3.85
S75-8-35-*T	120	90	168	52	45	41	1 1/2	33	3.30
S75-9-50-*T	150	122	203	52	45	41	2	40.5	7.35

All dimensions in mm unless otherwise shown.

Item	Article	Material
1	Armature	Stainless Steel 304
2	Plunger	Stainless Steel 304
3	Coil	Brass Wire
4	Plunger Seat	Teflon
5	Spring	Stainless Steel 304
6	Valve Body	Stainless Steel 304
7	Piston	Stainless Steel 304
8	Leak proof & Piston Ring	Teflon

Size 1/2" to 2" BSP
Function Normally Closed (power to open)
Valve Operation Servo Assisted
Body 304 Stainless Steel
Seat PTFE
Pressure Range 0.5 to 20 BAR (10 BAR Steam)
Media Steam & High Pressure Air / Oil Media